![]() ![]() If the condition is not corrected after 2 minutes, contact VTS for failure. 3-2: GPS antenna fault: try replacing the GPS antenna with a known good antenna.3-1: GPS module fault: Contact VTS for failure.This failure will occasionally happen in a working unit, but if the problem is persistent Contact VTS. 2-5: Last data session This means that any attempt to establish a data session failed.If not, then RMA the unit to VTS for failure analysis and repair. If this fixes the problem, then reinstall a new antenna. Try to substitute a known-good cellular antenna to see if the antenna may be broken. 2-3: No Check that the cellular antenna is correctly attached.If it is, then contact VTS for failure analysis and repair. 2-2: No SIM Make sure the SIM drawer contains a SIM and that it is correctly seated in the socket.Contact IntelliShift Technical Support for further instructions.Ģ-X Error Codes: Modem Related Error Codes 1-2: Low supply This could be caused by a true low voltage condition (Contact VTS with the serial number of the 1-1: The device has an expired license key due to a failure to resync with the VTS configuration server.if the GPS is tracking no satellites and the modem is not registered). Since there can be more than one error condition, the device rotates through the error codes (e.g. The second digit gives specific error information. The first digit indicates which general area is having a problem (hardware, modem, GPS, end-end service). The Green and Red LEDs are intended to aid in troubleshooting installations.Once everything is wired up and your VG-5 is placed, bundle up the harness neatly and zip tie to a factory harness to retain a factory looking install.Please place the VG-5 high up inside the dash to obtain a maximum GPS signal. ![]() Attach a small Ring Terminal and use a self-tapping screw to secure in place. For Ground, usually, any unpainted metal surface that is bolted directly to the body and isn’t a moving part is sufficed. ![]() Afterward, we use a zip tie to secure all our connections on each individual wire.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |